EZ-Poly the Original Multi-Mender
Where to Buy?



What is EZ-Poly
Thousands of Uses
Endless Applications
No Fumes. No Heat. Not an Epoxy!
Engineering and Technical Data
EZ-Poly Today!
EZ-Poly Special Reports
See EZ-Poly in Action
Shop EZ-Poly

 

EZ-Poly Home PageAbout Valiant TechnologiesContact Us
Experience EZ-Poly

Valiant Technologies, Inc.
10731 Treena Street Suite 206
San Diego, CA 92131

FOR IMMEDIATE RELEASE

NEW! ONE-STEP PARTICLE WOOD REPAIR!

Particle Board Repair – How do you repair a particle board kitchen cabinet where the door and hinge came off the cabinet base and tore a part of the particle board off with it? How can you repair the cabinet to get the hinge to stay in place? At last there is a way! No more C-clamps or mending plates! No more cutting and replacing using dowels. EZ-Poly Particle Board Repair kit will replace broken chunks from an edge, glue broken pieces, fill in stripped wood screw holes – repair any damage to any type of particle board. It structurally rebuilds and fills, seals and protects crumbling, rotted, and cracked particle board stronger than the original board. All in one simple step. One product, two hours and you’re done! It is the simplest, most effective particle board repair we have ever used and is unbeatable for strength and endurance. This extraordinary mending agent is uniquely suited to structural repair problems for wood and is one of the best new specialty wood re-builder fillers available on the market today. Particle Board Repair is a breakthrough high tech, two part, polyurethane based material also used as an industrial strength filler; bonds indoors, outdoors, is water and weatherproof and is insensitive to organic and inorganic solvents. Up to 20 minutes working time allows plenty of time to do the job right the first time. Starts out like pancake batter to reach hard to get to places. Easily forms to almost any shape, works like putty and once cured has the workability of hardwood; it can be sanded, sawed, drilled, nailed and painted with paint for plastic or over a plastic primer or shellac. Not an epoxy. No obnoxious fumes or toxic vapors, cleans up with soap and water. Mix equal parts of A&B, holds up in temperatures as low as 0 degrees F. Available in convenient single use SpakPaks, perfect for any size repair. Just knead the two pre-measured parts A&B for a fast, clean and perfect repair anytime. No need for cups or sticks and the packaging is its own applicator!

For more information please contact Gary Andrews at 1-877-VALIANT (877-825-4268) or email to garya @ val-tech.com

Contact: Gary Andrews
Tel: 858-564-0909
garya @ val-tech.com
http://www.ez-poly.net



Buy EZ-Poly™
Call for details, toll free, 877-729-2738


Valiant Technologies, Inc.
© Copyright 2002 - 2008
All Rights Reserved.
Privacy Policy
 
Web Hosting and Domain Names