EZ-Poly can be worked while curing, unlike
any other product! For these applications, mix up some EZ-Poly pour immediately, or wait
as it thickens to use like a paste or a putty.
Wall and ceiling holes & cracks: Apply thin layer - let stand for
10 min. re-apply repeatedly to fill, Scrape excess and sand in 1hr.
Stripped Anchors: Apply small amount to anchor hole. After 10 min,
fill hole completely. Scrape excess. Insert screw or bolt in 1 hr. Apply full weight in 24
hrs.
Termite damaged or rotted wood: Remove loose wood particles, pour into
damaged areas. For large repairs, build a mold using masking tape. Remove excess in 30
min, or sand off in 1 hr. Work with wood tools, Paint, or stain in 2 hrs.
Making molds and forms: Build a form into the desired shape using tape
for small jobs or a rigid form lined with plastic wrap, or sprayed lightly with non-stick
cooking spray for larger projects. Pour into the form and remove in 1 hr. Trim excess with
a knife, sand to perfect shape and finish, Paint, or stain in 2 hrs.
Attaching brick and tile: Mix about 4 oz for a 6x6 tile. For walls,
apply a thin layer to wall and tile and let stand for 10 min., then press the tile in
place. Tape in place until set. about 45 min.
Carving and sculpting: Carve like any softwood while curing, Once
fully cured, handle like hardwood using common woodworking tools, DremelŪ tool or lathe.
Porcelain and ceramics: Apply a small amount to both pieces. Join the
broken pieces immediately, use tape to hold in place if necessary.
Pool and fountain repair: Underwater - apply as putty in cracks with
spatula or fingers. For best results, drain water from area first. If bubbling or foaming
occurs, place pressure on the area with a spatula or fingertips. Wait at least 1 hour to
add water. Color to match the repair surface, as described below.
Adding color: Add color using colored chalk, artist's pastels, or
cement coloring. Add by using medium-fine sandpaper on colorant to create a powder. Mix
the chalk powder with part A until the color is slightly richer than desired. Then add
part B and mix thoroughly. Add more color as needed.
Expandability: Adding just a little water to EZ-Poly will cause it to
expand. This feature is great for repairs where there are large voids.
|
